Big Red Says
M-1 Cookware - Cooking With Your Helmet
At a temperature of 600°F and above, the austenitic structure of the M-1 helmet becomes fluid and unstable.
M-1 Helmet Shaping Operation I
The M-1 helmet was formed in a single pressing operation which yielded a 7-inch deep pot.
M-1 Helmet Shaping Operation II – Trimming Operation
The Trimming operation removed the hold down left by the initial drawing operation and prepared the helmet for the spanking operation.
Big Red Ratings Extravaganza
M-1 Helmet Production Breakage Reviews
A blog dedicated to the M-1 Helmet. Featuring education and resources for collectors, reenactors and history enthusiasts.
Big Red is doing his part but are you learning anything?
M-1 Helmet Production Breakage X
“Nipping It In The Bud”
All the necessary investigative and experimental development that should have taken place prior to the mass production of the helmet, had the urgent necessity of the war not warranted bypassing these steps, were conducted at this time in order to overcome the failings of the helmet’s design in combination with imposed criteria and limitations.